The DTF (Direct to Film) process is very unique and it is what makes is so special. The DTF transfer process prints high quality images to a film sheet using water-based inks and a adhesive powder. Once the powder is applied to the ink, it goes through a curing process. Once the cure is complete, this is when the magic happens. You can then apply it to a t-shirt, tank, sweatshirts, bags, hats and so much more using a heat press.

DTF transfers are so special because they print out each color so vibrant and crisp. DTF can be applied to SO many different materials. Cotton, Nylon, Polyesters, Blends and so much more. DTF transfers can be applied to all colors of materials, light and dark. This is what makes them so unique and can expand what you offer in your small business.

 The best part about DTF Transfers is the easy Application

©     Temperature of heat press should be at 310-312 degrees (Temperature can change to each garment or material you are using)

©     Prepress your material, this gets out the moisture in the garment and wrinkles

©     Place your transfer where you desire it (They make placement tools if needed)

©     Once transfer is place, apply your heat press.

©     Our transfers are HOT PEEL, once you applied heat for said time. You will remove the transfer film from the top. You will now see your image on the shirt nice and vibrant.

©     Apply a piece of Teflon on top of the design and press for another 10-12 seconds 

Gang sheets are done on a complete sheet of film. We print 16 inches wide by however long you would like. When you design your gang sheet you put all images on one sheet. You will build your gang sheet in our gang sheet builder, and it will come to you in a roll.

We have a user-friendly gang sheet builder that you can use or upload your own. We have in depth instructions and videos on it.